Yamaha WXA-50 WXA-50 Owner s Manual Advanced - Page 13

Connecting the power cable After all the connections are complete, plug the supplied power cable into the AC IN jack on the rear panel, and then plug the power cable to an AC wall outlet. To an AC wall outlet Setting the power to on/standby Use the z (power) key on the front panel or on the remote control to switch the unit's power between on and standby. Connecting with a wired router • Connect using the automatic setup function of the router - Connect to a network by simply connecting to it with a cable (p.15) Note When playing back high resolution contents (p.42) via the network, we recommend using the wired network connection for stable playback. Connecting to a network wirelessly Connect the unit to a wireless router (access point) using a wireless connection (WiFi). You can also connect the unit to a wireless network with the MusicCast CONTROLLER (p.16). Internet Wireless router Modem Connecting to a network Select whether to use a wired or wireless network connection, depending on your network environment. Connecting with a wireless router (access point) Select a connection method listed below according to your network environment. • Connecting with the MusicCast CONTROLLER - Follow the instructions in the MusicCast CONTROLLER screen (p.16) • Connecting using the Wi-Fi setting of an iOS device (iPhone/iPad/iPod Touch) - Share the Wi-Fi settings of the iOS device (p.14) • Connecting using the WPS push button on the wireless router (access point) - Set up using the WPS push button (p.14) • Connecting with a wireless router (access point) without a WPS push button - Set up the wireless connection manually (p.36) Mobile device (such as iPhone) The unit Note For a wireless connection, turn on the wireless switch on the rear panel. 13 En