Yamaha WXA-50 WXA-50 Owner s Manual Advanced - Page 14

n Sharing the Wi-Fi settings on an iOS device (WAC) You can easily setup a wireless connection by applying the connection settings with WAC (Wireless Accessory Configuration) on iOS devices (iPhone/iPad/iPod touch). Before proceeding, confirm that your iOS device is connected to a wireless router (access point). Note ▪ In order to share Wi-Fi settings, the iOS device must be installed with iOS 7 or later. ▪ The sharing process will reset the registered settings and specified account information on music streaming service accounts, registered presets, Bluetooth settings and bookmarks of Internet radio stations. ▪ The unit automatically starts WAC only at the first time of power on. When WAC does not start automatically, restore the unit to the factory default settings (p.36), and then follow the procedure below. 1 Turn on the unit. The NET indicator on the front panel flashes during the sharing process. 3 Select the network (access point) of which you want to share the settings with the unit. When the sharing process finishes, the unit is automatically connected to the selected network (access point). Tap here to start setup The network currently selected n Using the WPS push button configuration (WPS) You can easily set up a wireless connection with one push of the wireless router's WPS button. 1 Turn on the unit. 2 On the iOS device, select the unit as the AirPlay speaker in the WiFi screen. iOS 9 (example of English version) 2 Hold down (INPUT) on the front panel for 3 seconds. The NET indicator on the front panel flashes during the connection process. The name of the unit 14 En