Yamaha WXA-50 WXA-50 Owner s Manual Advanced - Page 30

SETTINGS (Menu) Item Equalizer Sound Manual High Mid Low Speaker Type Volume Input Setting L/R Balance Mode Initial Volume Level Max Volume Subwoofer Volume Input Trim Auto Play User Interface LED Dimmer Setting values Bypass / Auto / Manual -6.0 to 0.0 to +6.0 dB (0.5 dB steps) -6.0 to 0.0 to +6.0 dB (0.5 dB steps) -6.0 to 0.0 to +6.0 dB (0.5 dB steps) Compact / Bookshelf / Floor standing / In-ceiling / In-wall -12 to 0 to +12 (steps of 1) Off / On Mute, -80 dB to +0.0 dB (0.5 dB steps) -20 dB to +0.0 dB (0.5 dB steps) -6.0 to 0.0 to +6.0 dB (0.5 dB steps) -6.0 to 0.0 to +6.0 dB (0.5 dB steps) Off / On / Auto 0-3 Default Auto 0.0 dB 0.0 dB 0.0 dB Bookshelf 0 Off Explanation Adjusts the volumes for the low-frequency, middle-frequency, and high-frequency ranges of the audio. When this is "Auto", they stay synchronized with the main volume and perform hearing correction for the auditory response of the human ear. Adjusts the volume of the high-frequency range of the audio output. Adjusts the volume of the medium-frequency range of the audio output. Adjusts the volume of the low-frequency range of the audio output. Adjusts the effects of features such as Bass Extension and Adaptive EQ for optimal results depending on the speaker type. "Compact": optimizes for small speakers. "Bookshelf": optimizes for bookshelf speakers. "Floor standing": optimizes for large speakers that are placed on the floor. "In-ceiling": optimizes for speakers embedded in the ceiling. "In-wall": optimizes for speakers embedded in walls. Adjusts the balance of the volume between the left and right speakers. Enables/disables setting of the initial volume when the unit is turned on. -40.0 dB Sets the initial volume for when the unit is turned on. 0.0 dB 0.0 dB Sets an upper limit for the volume levels to which the unit can be adjusted using the remote control, etc. Makes fine adjustments to the volume of the subwoofer. 0.0 dB Compensates for volume differences between input sources. different for every input source 3 Sets whether or not audio is automatically played back from servers, USB devices, etc. when the unit is turned on or the input source is switched. "Off": always starts up with playback stopped. "On": always begins playing back the content that was played the previous time. "Auto": begins playback if audio was currently being played back when the unit was turned to standby. Note The setting value is different for every input source or service. Adjusts the brightness of the LED ("3" is the brightest). 30 En