Yamaha WXA-50 WXA-50 Owner s Manual Advanced - Page 31

SETTINGS (Menu) Item Front Panel Operation Sensor User Interface Remote ID Bluetooth Other Setup Network Info Access device Indication Bluetooth Standby Audio Receive Private Mode Audio Send Disconnect Transmitter Auto Power Standby Fan Mode Memory Guard Setting values Off / On Off / On ID1 / ID2 Off / On Off / On Off / On Off / On Off / 20min / 2h / 4h / 8h / 12h Off / Auto / On Off / On - Default On On ID1 On On Off Off Off Auto Off - Explanation Enables/disables operation using the front panel (other than the power key). Enables/disables operation using the remote control. When this is "Off", the unit can still be operated by other means. Changes the ID of the remote control from which the unit receives signals. To change the ID of the remote control, set it as follows. Set to ID1: on the remote control, hold down f and PRESET 1 at the same time for 5 seconds. Set to ID2: on the remote control, hold down f and PRESET 2 at the same time for 5 seconds. Lights the LED of the device currently being used for operation via a web browser. Enables/disables the Bluetooth function. Enables/disables the feature allowing the unit to be turned on by Bluetooth devices (Bluetooth Standby). Sets whether or not the unit responds to searches other than from the paired Bluetooth device. When this is "On", the unit does not respond to searches. Terminates the Bluetooth connection between the Bluetooth device and the unit. Enables/disables transmission of Bluetooth audio. Sets the unit to be automatically set to standby mode when there are no operations for a specified amount of time. When this is set to 20min, the unit will only be set to standby mode automatically if there is no input signal during the 20 minutes without any operations. Sets cooling fan operation to "Off", "Auto" or "On". Protects the settings of the unit and prevents them from being modified. Displays network information about the unit, such as its MAC address. 31 En