Yamaha YSP-600 Owner's Manual

Yamaha YSP-600 Manual

Get Yamaha YSP-600 PDF manuals and user guides View all Yamaha YSP-600 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha YSP-600 manual content summary:

  • Yamaha YSP-600 | Owner's Manual - Page 1
    UAB YSP-600 Digital Sound ProjectorTM OWNER'S MANUAL
  • Yamaha YSP-600 | Owner's Manual - Page 2
    INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE obsolete outlet. 10 Protect the power cord from being walked on
  • Yamaha YSP-600 | Owner's Manual - Page 3
    product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product
  • Yamaha YSP-600 | Owner's Manual - Page 4
    qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the power supply cable from the wall outlet. 16 Be sure to read the "Troubleshooting" section
  • Yamaha YSP-600 | Owner's Manual - Page 5
    tuner or a cable TV tuner 21 Connecting a digital airwave tuner 22 Connecting a VCR 23 Connecting other external components 24 Connecting a subwoofer 25 Connecting the AC power supply cable 26 SETUP Getting started 27 Installing batteries in the remote control 27 Operation range of the
  • Yamaha YSP-600 | Owner's Manual - Page 6
    sound experience as your local movie theater. Yamaha YSP-600 Digital Sound Projector challenges this preconception that complicated speaker setup easy to set up, but is also capable of reproducing the kind of powerful surround sound you have been waiting for from its built-in 2 woofers and 16
  • Yamaha YSP-600 | Owner's Manual - Page 7
    1080p video signal transmission) as well as multi-channel digital audio based on HDCP ◆ Simple and easy connections with HDMI supported external components ◆ Functional link with an HDMI control-compatible TV Versatile Remote Control The supplied remote control comes with preset remote control codes
  • Yamaha YSP-600 | Owner's Manual - Page 8
    Features The " " logo and "IntelliBeam" are trademarks of Yamaha Corporation. TruBass, SRS and the " " symbol are registered trademarks of SRS Labs, . Manufactured under license from 1 Ltd. Worldwide patents applied for. The " " logo and "Digital Sound Projector™" are trademarks of 1 Ltd. 4 En
  • Yamaha YSP-600 | Owner's Manual - Page 9
    Connections" on page 16. 3 Prepare the remote control and turn on the power of this unit. See "Getting started" on page 27. 4 Run AUTO SETUP. See "AUTO SETUP (IntelliBeam)" on page 32. 5 Play back a source. See "Playback" on page 42. English 6 Change the beam modes. See "Enjoying surround sound
  • Yamaha YSP-600 | Owner's Manual - Page 10
    SUR. DECODE +10 MENU TEST ENTER TV/AV YSP RETURN VOLUME CH TV VOL Cardboard microphone stand (×1) Demonstration DVD (×1) Digital audio pin cable (×1) (Orange) Audio pin cable (×1) MUTE TV INPUT TV MUTE CODE SET (White/Red) Battery (×2) (AA, R6, UM-3) OSD* video pin cable (×1) (Yellow
  • Yamaha YSP-600 | Owner's Manual - Page 11
    + STANDBY/ON 1 INTELLIBEAM MIC jack Connect the supplied IntelliBeam microphone for AUTO SETUP (see page 33). 2 Front panel display Shows information about the operational status of this unit. 3 Remote control sensor Receives infrared signals from the remote control. 4 INPUT Press repeatedly to
  • Yamaha YSP-600 | Owner's Manual - Page 12
    Controls and functions Front panel display 1 23 4 5 6 this unit is reproducing PCM (Pulse Code Modulation) digital audio signals. 8 MULTI indicator Lights up when this unit detects a multi channel digital audio signal (see page 43). the F.DISPLAY SET parameter in MANUAL SETUP (see page 69). 8 En
  • Yamaha YSP-600 | Owner's Manual - Page 13
    24). 0 DVD COAXIAL DIGITAL INPUT jack Connect your DVD player via a coaxial digital connection (see page 20). A SYSTEM CONNECTOR jack Use to connect a Yamaha subwoofer equipped with a SYSTEM CONNECTOR jack to this unit (see page 25). B AC power supply cable Connect to the AC wall outlet (see page 26
  • Yamaha YSP-600 | Owner's Manual - Page 14
    control other components using the remote control once you set the appropriate remote control codes. See "Controlling other components" on page 77 for details. 1 D * 2 3 *4 5 6 7 8 9 *0 *A *B *C STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP
  • Yamaha YSP-600 | Owner's Manual - Page 15
    Displays the setup menu on your TV monitor (see pages 34 of this unit. Select YSP when operating this unit digital satellite tuner, cable TV tuner, or VCR (see pages 77 to 80). R TV MUTE, CODE SET Mutes the audio output of your TV (see page 77). Sets up remote control codes (see page 76). Controls
  • Yamaha YSP-600 | Owner's Manual - Page 16
    This section describes the functions of the remote control used to control other components when the TV/AV mode is selected with the operation mode selector (4). STANDBY/ON POWER POWER AV TV 1 2 STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM
  • Yamaha YSP-600 | Owner's Manual - Page 17
    using a rack. Depending on your installation environment, connections with external components can be done before installing this unit unit This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit
  • Yamaha YSP-600 | Owner's Manual - Page 18
    Installation ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as
  • Yamaha YSP-600 | Owner's Manual - Page 19
    sure that the rack is large enough to allow adequate ventilation space around this unit (see page 13) and that it is strong enough to support the weight of both this unit and your TV. Installation PREPARATION English 15 En
  • Yamaha YSP-600 | Owner's Manual - Page 20
    other components to the mains power until all connections between components are complete. • Unplug the AC power supply cable before changing connections, moving or cleaning this unit. Audio connection Video connection TV This unit DVD player 16 En Subwoofer Digital satellite tuner or cable TV
  • Yamaha YSP-600 | Owner's Manual - Page 21
    Before connecting components ■ Cables used for connections Audio/Video A HDMI cable Audio Audio pin cable (supplied) (White) (Red) Optical cable (supplied) (White) (Red) Digital audio pin cable (supplied) (Orange) (Orange) Subwoofer pin cable 5 System connector cable Video OSD video pin
  • Yamaha YSP-600 | Owner's Manual - Page 22
    cable(s) to the HDMI jack(s) of this unit. Rear panel of this unit OUT DVD IN AUX HDMI L R VCR TV/STB SUBWOOFER VIDEO AUDIO INPUT OUT TV/STB AUX OPTICAL DVD SYSTEM COAXIAL CONNECTOR DIGITAL INPUT * This connection (except for a game console) is not necessary if your TV has a built-in
  • Yamaha YSP-600 | Owner's Manual - Page 23
    optical digital audio connections at the same time as shown in the illustration below, the digital audio signals input at the TV/STB OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the TV/STB AUDIO INPUT jacks. Rear panel of this unit L R VCR TV/STB SUBWOOFER VIDEO
  • Yamaha YSP-600 | Owner's Manual - Page 24
    , refer to the operation manual supplied with your DVD player/recorder. • If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see page 24). Rear panel of this unit L R VCR TV/STB SUBWOOFER VIDEO AUDIO INPUT OUT TV/STB
  • Yamaha YSP-600 | Owner's Manual - Page 25
    TV/STB AUDIO INPUT jacks on this unit. Note This connection is not necessary if your TV has a built-in digital satellite tuner or cable TV tuner (see "Connecting a TV" on page 19). Rear panel of this unit L R VCR TV/STB SUBWOOFER VIDEO AUDIO INPUT OUT TV/STB AUX OPTICAL DVD SYSTEM COAXIAL
  • Yamaha YSP-600 | Owner's Manual - Page 26
    is not necessary if your TV has a built-in digital airwave tuner (see "Connecting a TV" on page 19). Rear panel of this unit L R VCR TV/STB SUBWOOFER VIDEO AUDIO INPUT OUT TV/STB AUX OPTICAL DVD SYSTEM COAXIAL CONNECTOR DIGITAL INPUT Connect to the analog audio output jacks on the TV
  • Yamaha YSP-600 | Owner's Manual - Page 27
    the VCR AUDIO INPUT jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks. Rear panel of this unit L R VCR TV/STB SUBWOOFER VIDEO AUDIO INPUT OUT TV/STB AUX OPTICAL DVD SYSTEM COAXIAL CONNECTOR DIGITAL INPUT R L Analog audio output Audio Audio pin
  • Yamaha YSP-600 | Owner's Manual - Page 28
    external components If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX OPTICAL DIGITAL INPUT jack on this unit. Rear panel of this unit L R VCR TV/STB SUBWOOFER VIDEO AUDIO INPUT OUT TV/STB
  • Yamaha YSP-600 | Owner's Manual - Page 29
    alone does not output sound from the connected subwoofer. To output sound from the connected subwoofer, turn on the power of your subwoofer and then run AUTO SETUP (see page 32) or select SWFR for BASS OUT in SUBWOOFER SET (see page 64). When connecting a Yamaha subwoofer equipped with a SYSTEM
  • Yamaha YSP-600 | Owner's Manual - Page 30
    Connections Connecting the AC power supply cable Once all other connections are complete, plug the AC power supply cable into the AC wall outlet. To the AC wall outlet 26 En
  • Yamaha YSP-600 | Owner's Manual - Page 31
    is unwantedly erased, insert new batteries and set the remote control codes again. Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following places: - places of high humidity, such as near a bath
  • Yamaha YSP-600 | Owner's Manual - Page 32
    mode, only STANDBY/ON on the front panel or on the remote control is operational, and the other control buttons on the front panel or on the remote control are not operational until the power of this unit is turned on. STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV
  • Yamaha YSP-600 | Owner's Manual - Page 33
    your TV is connected to the VIDEO OUT jack on this unit to display the OSD of this unit. 2 Press STANDBY/ON to turn on the power of this unit. STANDBY/ON 3 Turn on the power of your TV. The following screen appears on your TV. YSP-600 or STANDBY/ON Front panel Remote control Push [MENU] to
  • Yamaha YSP-600 | Owner's Manual - Page 34
    " on page 45. If you want to make additional settings and adjustments Run MANUAL SETUP. See "MANUAL SETUP" on page 58. y • If you cannot clearly hear a sound beam from a specific channel, adjust settings for SETTING PARAMETERS (see page 60) or for BEAM ADJUSTMENT (see page 61) in BEAM MENU. • If
  • Yamaha YSP-600 | Owner's Manual - Page 35
    appears in SET MENU of this unit. 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press MENU. The SET MENU screen appears on your TV. MENU p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 4 Press / to select the desired language, and press
  • Yamaha YSP-600 | Owner's Manual - Page 36
    AUTO SETUP (INTELLIBEAM) AUTO SETUP (IntelliBeam) This unit creates a sound field by reflecting sound beams on the walls of your listening skipped if SOUND OPTIMZ only is selected. *2 The sound optimization procedure is skipped if BEAM OPTIMZ only is selected. *3 The subwoofer checking procedure is
  • Yamaha YSP-600 | Owner's Manual - Page 37
    is not possible, you can manually fine-tune the sound beam angle and balance the sound beam output levels using MANUAL SETUP (see page 58) once the AUTO SETUP procedure is completed. • If a subwoofer with adjustable volume and crossover/high-cut frequency controls is connected to this unit, set
  • Yamaha YSP-600 | Owner's Manual - Page 38
    . INPUT VOLUME STANDBY/ON STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU TEST ENTER TV/AV YSP RETURN VOLUME CH TV VOL 34
  • Yamaha YSP-600 | Owner's Manual - Page 39
    a subwoofer is connected to this unit, turn on the power of the subwoofer. STANDBY/ON or STANDBY/ON Front panel Remote control 2 Set the operation mode selector to YSP. 3 Press MENU. The SET MENU screen appears on your TV. MENU p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP
  • Yamaha YSP-600 | Owner's Manual - Page 40
    walls in your listening room? AUTO SETUP PREPARATION & CHECK Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the YSP SOUND OPTIMZ only (Sound SETUP" on page 38 for a complete list of error messages and their proper remedies. Follow the instructions and perform the AUTO SETUP
  • Yamaha YSP-600 | Owner's Manual - Page 41
    SETUP procedure again. For details, see step 9. • If "SUBWOOFER : NOT APPLICABLE" is displayed even though a subwoofer is connected to this unit, increase the volume level of the subwoofer and run the AUTO SETUP result. ENTER AUTO SETUP COMPLETE Please remove the MIC from the YSP and the listening
  • Yamaha YSP-600 | Owner's Manual - Page 42
    produced by this unit because the sound output level is too low. Make sure that the IntelliBeam microphone is firmly connected to this unit and placed in a proper location. If the problem persists, contact the nearest authorized Yamaha service center for assistance. ERROR E-7 Unexpected error
  • Yamaha YSP-600 | Owner's Manual - Page 43
    if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains mode selector to YSP. TV/AV YSP 2 Press MENU. The SET MENU screen appears on your TV. MENU p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up
  • Yamaha YSP-600 | Owner's Manual - Page 44
    your listening environment. 1 Set the operation mode selector to YSP. TV/AV YSP 2)MEMORY SAVE MEMORY1 Save Now ? Push [ENTER] to Save p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter y • The control buttons used for SET MENU are displayed at the
  • Yamaha YSP-600 | Owner's Manual - Page 45
    MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. ENTER ENTER p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 7 Press MENU to exit. The SET MENU screen disappears from your TV. MENU 1)MEMORY LOAD MEMORY1 Load
  • Yamaha YSP-600 | Owner's Manual - Page 46
    Playback Selecting the input source You can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (STB, VCR, DVD, AUX, or TV) on the remote control. The name of the selected input source and
  • Yamaha YSP-600 | Owner's Manual - Page 47
    owner's manual. 4 Play back DVD on your DVD player using the supplied remote control. Audio signals from your DVD player are output from this unit. y • You can use the supplied demonstration DVD to check the digital signals being input at the DVD player with the digital connection (optical
  • Yamaha YSP-600 | Owner's Manual - Page 48
    ON VOLUME CH TV VOL MUTE TV INPUT TV MUTE CODE SET 1 Press MUTE to mute the sound. "AUDIO MUTE ON" appears in the front panel VOLUME or VOLUME + Front panel Remote control Flashes XXDVDXXX5BEAM 2 Press MUTE again (or press VOLUME +/-) to resume the sound output. "AUDIO MUTE OFF" appears
  • Yamaha YSP-600 | Owner's Manual - Page 49
    You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes • When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 60), 5 Beam and 3 Beam
  • Yamaha YSP-600 | Owner's Manual - Page 50
    sources, surround left and right signals are mixed down and output from the front left and right channels. • The front left and right sound beams are output toward the walls in your listening room. • "SP Pos. Corner!" appears in the front panel display if INSTALLED POSITION is set to ANGLE TO
  • Yamaha YSP-600 | Owner's Manual - Page 51
    Dolby Digital 5.1 EX, Dolby Digital EX, or Dolby Digital Surround EX will be played back in DTS or Dolby Digital. Enjoying surround sound ■ , the surround mode used for the previously selected input source before the power was turned off is automatically selected. • If the surround modes are
  • Yamaha YSP-600 | Owner's Manual - Page 52
    channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. y The beam mode SUR. DECODE +10 MENU or SUR. DECODE ENTER TEST ENTER TV/AV YSP RETURN 1 Set the operation mode selector to YSP. TV/AV YSP Neo:6 Cinema Neo:6 Music PRO LOGIC PLII Movie
  • Yamaha YSP-600 | Owner's Manual - Page 53
    8 9 SUR. DECODE +10 MENU TEST ENTER TV/AV YSP RETURN VOLUME CH TV VOL 4 If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. 5 Press
  • Yamaha YSP-600 | Owner's Manual - Page 54
    effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION Adjusts the difference in volume between the front and surround channels to the desired volume balance. Control range: -3 (toward the surround direction) to
  • Yamaha YSP-600 | Owner's Manual - Page 55
    remote control. Sounds are output from the front right and left channels. This is ideal for playing back hi-fi sources, such as CDs, and can be used to replace your TV speakers. Notes • When you play back Dolby Digital TEST ENTER TV/AV YSP RETURN 1 Set the operation mode selector to YSP. TV/AV YSP
  • Yamaha YSP-600 | Owner's Manual - Page 56
    Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want is output from the subwoofer connected to this unit. Using auto-adjust function The My Beam microphone on the remote control collects the test tones from this unit
  • Yamaha YSP-600 | Owner's Manual - Page 57
    of the auto-adjust function. 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press MY BEAM. "MY BEAM" is displayed in the front panel display. MY BEAM 5 3 Press / while "MY BEAM" is displayed to adjust the beam angle. Control range: L90° to R90° • Press repeatedly to increase the horizontal
  • Yamaha YSP-600 | Owner's Manual - Page 58
    (i.e. due to commercials, etc.). AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 +10 MENU TEST ENTER TV/AV YSP RETURN 1 Set the operation mode selector to YSP. TV/AV YSP Lights up • STANDBY/ON or disconnect the AC power supply cable from the AC wall outlet. • The volume mode
  • Yamaha YSP-600 | Owner's Manual - Page 59
    is still playing back a source. TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 120min SLEEP 90min TEST ENTER TV/AV YSP RETURN SLEEP 60min SLEEP 30min 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press SLEEP repeatedly
  • Yamaha YSP-600 | Owner's Manual - Page 60
    Using the sleep timer ■ Canceling the sleep timer 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press SLEEP repeatedly until "SLEEP OFF" appears in the front panel display. SLEEP XSLEEPXXOFF /ON to set this unit to the standby mode or unplug the AC power supply cable from the AC outlet. 56 En
  • Yamaha YSP-600 | Owner's Manual - Page 61
    on the power again. 6 Set the input source selector of your TV to this unit (HDMI, etc.). 7 Select the connected component as the input source by pressing INPUT on the front panel of this unit (or press one of the input selector buttons on the remote control). Confirm that the video image played
  • Yamaha YSP-600 | Owner's Manual - Page 62
    parameters in BEAM MENU first before making settings for the parameters in SOUND MENU, INPUT MENU, and DISPLAY MENU. SOUND MENU Use to manually adjust the various parameters related to the sound output. Item TONE CONTROL SUBWOOFER SET MUTE LEVEL AUDIO DELAY DD/DTS Dynamic Range TruBass Features
  • Yamaha YSP-600 | Owner's Manual - Page 63
    MANUAL SETUP Use the remote control to access and adjust each parameter. 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU TEST ENTER TV/AV YSP RETURN VOLUME CH TV VOL y You can adjust the SET MENU parameters while the unit is reproducing sound. 1 Set the operation mode selector to YSP. TV/AV YSP
  • Yamaha YSP-600 | Owner's Manual - Page 64
    the various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU FLAT TO WALL ANGLE TO WALL OR CORNER p p p p 2)BEAM MENU . A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION [ ]/[ ]:Up/Down [ENTER]:Enter y You can adjust the sound beam output level of each
  • Yamaha YSP-600 | Owner's Manual - Page 65
    from the unit Room width MANUAL SETUP ■ BEAM ADJUSTMENT (Beam adjustment) Use to manually adjust the various sound beam settings. We recommend that angle of sound beams for each channel. By adjusting the horizontal angle of the sound beams, you can optimize the sound beam paths. A test tone is
  • Yamaha YSP-600 | Owner's Manual - Page 66
    MANUAL SETUP BEAM TRAVEL LENGTH (Beam travel length) A certain amount of delay must be applied to the sound from each channel so that all sounds can arrive at the listening position at the same time. This menu sets the distance that sound beams travel after being output and reflected off the wall
  • Yamaha YSP-600 | Owner's Manual - Page 67
    of the front left and right or surround left and right sound beams are on curtain or other acoustically absorbent surfaces, you can achieve more effective surround sound by increasing the treble level for those sound beams. MANUAL SETUP ■ IMAGE LOCATION (Image location) Use to adjust the direction
  • Yamaha YSP-600 | Owner's Manual - Page 68
    MANUAL SETUP SOUND MENU Use to manually adjust the various parameters related to the sound output. SET MENU → MANUAL SETUP → SOUND MENU 1)SOUND MENU . A)TONE CONTROL B)SUBWOOFER SET C)MUTE LEVEL D)AUDIO DELAY E)DD/DTS Dynamic Range F)TruBass [ ]/[ ]:Up/Down [ENTER]:Enter p p ■ TONE CONTROL (Tone
  • Yamaha YSP-600 | Owner's Manual - Page 69
    LCD monitors or projectors. Choices: 0 to 160 msec D)AUDIO DELAY AUDIO DELAY;;;;;0msec p [ ]/[ ]:Select [ENTER]:Return MANUAL SETUP ■ TruBass Use to turn on or off the bass sound enhancer. The SRS TruBass technology improves bass even without a subwoofer and provides deeper, richer bass in the
  • Yamaha YSP-600 | Owner's Manual - Page 70
    connected to the DIGITAL INPUT jacks when you turn on the power sounds will be produced. • Select TV/STB ANALOG to adjust the level of audio and video signals input at the TV/STB AUDIO INPUT jacks of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB • Select TV/STB DIGITAL
  • Yamaha YSP-600 | Owner's Manual - Page 71
    control) D)HDMI SET . a)SUPPORT AUDIO b)AUDIO SELECT c)VIDEO INFO. d)HDMI CONTROL [ ]/[ ]:Up/Down [ENTER]:Enter SUPPORT AUDIO (Support audio) Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Choices: YSP-600
  • Yamaha YSP-600 | Owner's Manual - Page 72
    this unit. It is invalid when the sound is output from the device connected to the HDMI OUT jacks. VIDEO INFO. (Video information) Use to display the video information of the current input signal. Choices: HDMI RES., HDMI ERROR p p p HDMI CONTROL (HDMI control) Use this function to link this unit
  • Yamaha YSP-600 | Owner's Manual - Page 73
    SET MENU → MANUAL SETUP → DISPLAY MENU MANUAL SETUP ■ OSD SET operate this unit by using the control buttons on the front panel or on the remote control. Choices: -2, -1, OFF AUTO Australia, Europe, Asia, and Korea models), FEET (U.S.A. and Canada models) C)UNIT SET METERS FEET p p p [ ]/[
  • Yamaha YSP-600 | Owner's Manual - Page 74
    selector to YSP. TEST SUBWOOFER TV/AV YSP 2 Press TEST. "TEST FRONT L" appears in the front panel display and a test tone is output from the front left channel. Note "TEST SUBWOOFER" is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see
  • Yamaha YSP-600 | Owner's Manual - Page 75
    as a DVD. CH LEVEL MENU TEST ENTER TV/AV YSP RETURN FRONT L +1.0dB CENTER -2.5dB FRONT R +1.0dB SUR.R +2.0dB SUR.L +2.0dB SWFR --dB Note "SWFR" is available only when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 64). ADVANCED OPERATION
  • Yamaha YSP-600 | Owner's Manual - Page 76
    Adjusting the audio balance 3 Press / to adjust the channel volume. ENTER Control range: -10.0 dB to +10.0 dB 4 Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot
  • Yamaha YSP-600 | Owner's Manual - Page 77
    INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM TEST ENTER TV/AV YSP RETURN AUX AUTO AUX DTS 1 Set the operation mode selector to YSP. TV/AV YSP Digital or DTS 2) PCM 3) Analog y Use this input mode in most cases. • DTS Selects only digital when both digital and analog
  • Yamaha YSP-600 | Owner's Manual - Page 78
    . STANDBY/ON INPUT INPUT VOLUME STANDBY/ON MEMORYXPROTECT STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV CH LEVEL MENU TEST ENTER TV/AV YSP RETURN 1 Press STANDBY/ON on the remote control to turn off the power of this unit. STANDBY/ON 3 Release INPUT on the
  • Yamaha YSP-600 | Owner's Manual - Page 79
    the following procedure you must run AUTO SETUP again to match your surround sound environment. FACTORYXPRESET 7 Press STANDBY/ON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting will be activated when you turn on the power of this unit next time. y When the
  • Yamaha YSP-600 | Owner's Manual - Page 80
    using the remote control. If the external component functions correctly the remote control code setup is successful. If the external component does not function correctly, the remote control code may be incorrect. Confirm that the remote control code is correct. See "List of remote control codes" at
  • Yamaha YSP-600 | Owner's Manual - Page 81
    MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU TEST ENTER TV/AV YSP RETURN VOLUME CH TV VOL MUTE TV INPUT TV MUTE CODE SET 4 5 6 7 Remote control features 1 Numeric buttons Selects a TV
  • Yamaha YSP-600 | Owner's Manual - Page 82
    of the remote control changes to the STB operation mode. TV/AV YSP STB 1 2 STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU TEST
  • Yamaha YSP-600 | Owner's Manual - Page 83
    AV YSP RETURN VOLUME CH TV VOL 4 MUTE TV INPUT TV MUTE CODE SET 1 Numeric buttons Enter numeric digits. 2 CH +/- Switches between the available VCR channels. 3 Operation buttons for VCR Operate your VCR, such as play and stop. 4 AV POWER Turns on or off the power of your VCR. Remote control
  • Yamaha YSP-600 | Owner's Manual - Page 84
    Be sure to set up a remote control code for your TV before setting macros POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU TEST ENTER TV/AV YSP
  • Yamaha YSP-600 | Owner's Manual - Page 85
    one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. ■ Operating macros Remote control features Press and hold one of the input selector buttons for approximately two seconds to select the input source you want to
  • Yamaha YSP-600 | Owner's Manual - Page 86
    the HDCP copy protection standards. Connect the HDMI components that support the HDCP copy protection standards. SUPPORT AUDIO is set to OTHER and HDMI audio signals are not being played back on this unit. Set SUPPORT AUDIO to YSP-600 in MANUAL SETUP. The sound suddenly goes off. The sleep
  • Yamaha YSP-600 | Owner's Manual - Page 87
    30 seconds. No sound is heard from the TV connected via HDMI. The TV does not accept the multi-channel audio signals. Convert the multi-channel audio signals to the 2-channel audio signals at the source component such as a DVD player. "SUPPORT AUDIO" is set to "YSP-600". Set "SUPPORT AUDIO" to
  • Yamaha YSP-600 | Owner's Manual - Page 88
    Troubleshooting ■ Remote control Problem Cause Remedy The remote control does not work and/or function properly. Wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (
  • Yamaha YSP-600 | Owner's Manual - Page 89
    so that the listener feels an expanded sound and will not tire, even when listening to music or a movie for long time. ■ HDMI HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any source
  • Yamaha YSP-600 | Owner's Manual - Page 90
    the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems. ■ PCM (Linear PCM) Linear technique for sampling the size of the analog signal per very small unit of time. Standing for pulse code modulation, the analog signal sound that the speaker system is incapable of producing. 86 En
  • Yamaha YSP-600 | Owner's Manual - Page 91
    17 OSD video pin cable 17 ■P PCM 86 Power 28 ■R Rear panel 9 Remote control 10 Remote control code 76 Remote control sensor 27 ■S SET MENU 29 Sleep timer 55 Stereo plus 3 Beam 46 Surround mode 47 Surround sound 45 SOUND MENU 64 Stereo sound 51 System parameter 74 ■T Test tone 70
  • Yamaha YSP-600 | Owner's Manual - Page 92
    digital) AUX, DVD HDMI IN 2 • Output Jacks SUBWOOFER OUT (1.5 V, less than 120 Hz) ...... 1 (Subwoofer) VIDEO OUT (1 Vp-p, 75 1 (OSD) HDMI OUT 1 • System Connector Jack INTELLIBEAM MIC 1 (Microphone input) SYSTEM CONNECTOR 1 (System control) GENERAL • Power Supply [U.S.A. and Canada models
  • Yamaha YSP-600 | Owner's Manual - Page 93
    sales receipt (showing date of purchase, product code and dealer's name) MUST accompany the defective product, along with a statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service with Yamaha's instructions
  • Yamaha YSP-600 | Owner's Manual - Page 94
    remote control codes 216 YAMAHA 299, 292, 242, 285, 287, 253, 206 ZENITH 216, 261, 271 DVD, Blu-ray, HD DVD PLAYER (RECORDER) AIWA 648, 649 APEX DIGITAL 652, 396, 397 FISHER 393, 336 FUNAI 397 GE 328, 333, 387 GO VIDEO 321, 331, 341, 351, 363 GOODMANS 334, 337 GRUNDIG 332, 338
  • Yamaha YSP-600 | Owner's Manual - Page 95
    MOTOROLA 748 OAK 739, 742, 743 PANASONIC 744, 745, 746, 747, 783, 784 PHILLIPS 763, 764, 765, 766, 767, 768 PIONEER 748, 785, 747 RADIO SHACK749 SCIENTIFIC ATLANTA 752, 753, 754 SONY 756, 757 TOCOM 755 UNIVERSAL 769, 772, 773, 774, 775 VIEWSTAR 764, 766, 776, 777, 778, 779, 782
  • Yamaha YSP-600 | Owner's Manual - Page 96
    , ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD
  • Yamaha YSP-600 | Owner's Manual - Page 97
    DIGITAL INPUT Subwoofer System connection Audio connection YSP-600 To the AC wall outlet Do not plug the power supply cable into an AC wall outlet until all connections are complete. If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry out the AUTO SETUP
  • Yamaha YSP-600 | Owner's Manual - Page 98
    of this unit turns on. Before operations, insert batteries into the remote control (see page 27 in the Owner's Manual). If necessary, adjust the volume level of this unit. STANDBY/ON POWER POWER AV TV If you have connected the subwoofer, set the volume and crossover/high cut frequency. Refer to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
YSP-600
Digital Sound Projector
TM
OWNER’S MANUAL
UAB