Yamaha YSP-600 Owner's Manual - Page 77

Selecting the input mode Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, and AUX. y We recommend setting the input mode to AUTO in most cases. AV TV 3 Press INPUTMODE repeatedly to toggle between input modes. STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU INPUTMODE DVD AUTO DVD DTS When DVD is selected as the input source TV/STB AUTO TV/STB DTS TV/STB ANALOG When TV or STB is selected as the input source TEST ENTER TV/AV YSP RETURN AUX AUTO AUX DTS 1 Set the operation mode selector to YSP. TV/AV YSP When AUX is selected as the input source Note ANALOG is not available as the input mode of DVD and AUX. 2 Press one of the input selector buttons to select the desired input source. STB VCR DVD AUX TV • AUTO Automatically selects audio input signals in the following priority order: 1) Dolby Digital or DTS 2) PCM 3) Analog y Use this input mode in most cases. • DTS Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS. • ANALOG Selects only analog signals. Even when both digital and analog signals are input simultaneously, only analog signals are selected. y You can adjust the default input mode to be selected when the power of this unit is turned on by adjusting INPUT MODE in INPUT MENU (see page 66). ADVANCED OPERATION English 73 En