Yamaha YSP-600 Owner's Manual - Page 79
Memory, Protect, Volume, Panel, F.panel, Factory, Preset
View all Yamaha YSP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Adjusting the system parameters Parameter to be changed and front panel display MEMORY PROTECT You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. Parameter settings ON, OFF MEMORYXPROTECT MAX VOLUME You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. MAX, 99 to 01, MIN Control step: 1 MAXXVOLUMEXSET TURN ON VOLUME You can set the initial volume level when the power of this unit is turned on. MAX, 99 to 01, OFF Control step: 1 TURNXONXVOLUME DEMO MODE You can test the sound beam output from this unit to experience the sound beam. ON, OFF DEMOXMODE PANEL INP. KEY You can disable the INPUT on the front panel when you adjust the system parameters. ON, OFF PANELXINP.XKEY F.PANEL KEY You can disable the front panel keys except when you adjust the system parameters. ON, OFF F.PANELXKEY FACTORY PRESET You can reset all of the parameters of this unit to the factory presets. This procedure completely resets ALL the parameters in SET MENU. RESET, CANCEL Note After performing the following procedure you must run AUTO SETUP again to match your surround sound environment. FACTORYXPRESET 7 Press STANDBY/ON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting will be activated when you turn on the power of this unit next time. y When the demo mode is turned on, restart the unit, then press ENTER while playing back sources to test the sound beam. The sound beam being output shuttles between left and right. Press ENTER again to stop shuttling. ADVANCED OPERATION English 75 En