Yamaha YSP-600 Owner's Manual - Page 54
Adjusting surround mode parameters, When Dolby Pro Logic II Music is, selected - dimensions
View all Yamaha YSP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Enjoying surround sound Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 7 0 CH LEVEL 8 9 SUR. DECODE +10 MENU TEST ENTER TV/AV YSP RETURN 1 Repeat steps 1 and 2 in "Enjoying 2-channel sources in surround sound" on page 48 and select PL II Music or Neo:6 Music. 2 Press / to select the parameter. ENTER ■ When Dolby Pro Logic II Music is selected PANORAMA Gives the front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION Adjusts the difference in volume between the front and surround channels to the desired volume balance. Control range: -3 (toward the surround direction) to +3 (toward the front direction) Default setting: STD (standard) C. WIDTH Distributes the center channel sound to the left and right. If 0 is selected, the center channel sound is output only from the center channel. Control range: 0 to 7 Default setting: 3 ■ When DTS Neo:6 Music is selected C. IMAGE Adjusts the center image from three channels (front left and right and center) to varying degrees. Control range: 0.0 (wider) to 1.0 (toward the center) Default setting: 0.3 3 Press / to configure the selected parameter. ENTER 50 En