Yamaha YSP-600 Owner's Manual - Page 73

DISPLAY MENU Use to manually adjust the various parameters related to the display. SET MENU → MANUAL SETUP → DISPLAY MENU MANUAL SETUP ■ OSD SET (OSD settings) Use to adjust the display position and to set the display time of the OSD. B)OSD SET 4)DISPLAY MENU . A)F.DISPLAY SET B)OSD SET C)UNIT SET p OSD SHIFT;;;;;;;;;;0 p [ ]/[ ]:Select [ENTER]:Return p p p p [ ]/[ ]:Up/Down [ENTER]:Enter ■ F.DISPLAY SET (Front panel display settings) Use to adjust the brightness and display settings of the front panel display. A)F.DISPLAY SET . STANDARD DIMMER;;;;;OFF AUTO DIMMER OFF p [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return STANDARD DIMMER (Standard dimmer) Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control. Choices: -2, -1, OFF AUTO DIMMER (Auto dimmer) If no operation is performed for a specified period of time, the front panel display dims. Use to adjust the brightness of the front panel display in this case. Choices: OFF (the same brightness as the STANDARD DIMMER setting), -1 to -3 (based on the STANDARD DIMMER setting), DISPLAY OFF p OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the - (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices: -5 to +5 Initial setting: 0 ■ UNIT SET (Unit settings) Use this to change the display unit of measurement. Choices: METERS (Australia, Europe, Asia, and Korea models), FEET (U.S.A. and Canada models) C)UNIT SET METERS FEET p p p [ ]/[ ]:Select [ENTER]:Return • Select METERS to enter distances in meters. • Select FEET to enter distances in feet. Note If you change this setting, the adjusted sound beam settings may change. ADVANCED OPERATION English 69 En