ZyXEL NAS326 User Guide - Page 106
Control Panel - ssh
View all ZyXEL NAS326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
CHAPTER 10 Control Panel 10.1 Overview This chapter discusses the Control Panel screens. Use the Control Panel screens to configure network settings and upload firmware. 10.2 What You Can Do • Use the TCP/IP screen (Section 10.4 on page 107) to configure the NAS's TCP/IP network connection settings such as the teaming mode and IP addresses. • Use the PPPoE screen (Section 10.4.2.2 on page 111) to configure PPPoE settings for a direct Internet connection. • Use the UPnP Port Mapping screen (Section 10.5 on page 113) to automatically configure your Internet gateway's firewall and Network Address Translation (NAT) to allow access to the NAS from the Internet. • Use the Terminal screen (Section 10.6 on page 119) to enable or disable Telnet and SSH access. • Use the DyDNS screen (Section 10.7 on page 120) to configure the domain name settings of your NAS. • Use the FW Upgrade screen (Section 10.8 on page 122) to upload new firmware. 10.3 What You Need to Know IP Address The NAS needs an IP address to communicate with other devices on your network. The NAS can get an IP address automatically if you have a device on your network that gives them out. Or you can assign the NAS a static (fixed) IP address. DNS Server Address A DNS (Domain Name System) server maps domain names (like www.zyxel.com) to their corresponding numerical IP addresses. This lets you use domain names to access web sites without having to know their IP addresses. The NAS can receive the IP address of a DNS server automatically (along with the NAS's own IP address). You can also manually enter a DNS server IP address in the NAS. Cloud Storage User's Guide 106