ZyXEL NAS326 User Guide - Page 111

Chapter 10 Control Panel The following table describes the labels in this screen. Table 41 Control Panel > Network > TCP/IP > Network Interface > Create LABEL Automatically DESCRIPTION Select this option to have the interface get IP address information automatically. Manually If no IP address information is assigned, the NAS uses Auto-IP to assign itself an IP address and subnet mask. For example, you could connect the NAS directly to your computer. If the computer is also set to get an IP address automatically, the computer and the NAS will choose addresses for themselves and be able to communicate. Select this option for the interface to use fixed TCP/IP information. You must fill in the following fields. IP Address - Type an IP address in this field. Subnet Mask - Type an IP subnet mask in this field. Create Cancel Default Gateway - Type a default gateway address in this field. Click this to save the settings and create a port trunking. Click this to return to the previous screen without saving. 10.4.2.2 Configuring PPPoE Settings Use this screen to configure PPPoE settings for a direct Internet connection. Select the ppp0 interface and then click Edit. Figure 64 Control Panel > Network > TCP/IP > Network Interface > PPPoE The following table describes the labels in this screen. Table 42 Control Panel > Network > TCP/IP > Network Interface > PPPoE LABEL DESCRIPTION Enable PPPoE to directly connect to the Internet Select or clear this field to enable or disable PPPoE. Username Enter the username exactly as your ISP assigned. If assigned a name in the form user@domain where domain identifies a service name, then enter both components exactly as given. Password Enter the password associated with the username above. Show password Select this field to reveal the password hidden behind asterisks or clear this field to hide the password. Cloud Storage User's Guide 111