ZyXEL NAS326 User Guide - Page 70
Table 16, Label, Description
View all ZyXEL NAS326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Figure 43 Disk Group Chapter 8 Storage Manager The following table describes the labels in this screen. Table 16 Disk Group LABEL DESCRIPTION Create Click this to format internal hard disks and create a new disk group. All data on the disk(s) will be lost. Manage Note: This button is not available while the NAS is creating, deleting, or changing the RAID type of any volume or disk group. Select a volume and click Manage to edit, repair, or expand the volume. Delete Note: This button is available only when you can repair, expand or change RAID type. Select a disk group and click Delete to remove it. Add Hot Spare Note: If you delete a disk group, all data in the disk group is erased. Select a RAID 1 or RAID 5 disk group and click Add Hot Spare to add another disk as a hot-spare (standby) to the RAID array. See Section 8.6 on page 98 for more information. Note: The capacity of the disk you are adding must be equal to or greater than the largest disk in the RAID 1 or RAID 5 array. Remove Hot Spare Note: You need four hard disks installed to use RAID 5 with hotspare. Select a RAID 1 or RAID 5 disk group and click Remove Hot Spare to remove the standby drive from the RAID array. Cloud Storage User's Guide 70