eMachines E644G eMachines E644 and E644G Series Serivce Guide - Page 61
Setting a Password, Set Supervisor Password, Table 2-3., BIOS Security, Continued
View all eMachines E644G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Table 2-3. BIOS Security (Continued) Parameter Description Password on Boot ! CAUTION: If Power-on-Password authentication is enabled, the BIOS password can only be cleared by initiating the Crisis Disk Recovery procedure. Refer to Crisis Disk Recovery. Option Disabled or Enabled Shows if password is required during system boot NOTE: NOTE: When prompted to enter password, three attempts are allowed before system halts. Resetting BIOS password may require computer be returned to dealer. Setting a Password 0 Perform the following to set user or supervisor passwords: 1. Use the and keys to highlight the Set Supervisor Password parameter and press Enter. The Set Supervisor Password dialog box appears. NOTE: NOTE: To change an existing password, refer to Changing a Password. Figure 2-4. Set Supervisor Password 2. Type a new password in the Enter New Password field. Passwords are not case sensitive and the length must not exceed 12 alphanumeric characters (A-Z, a-z, 0-9). Retype the password in the Confirm New Password field. + IMPORTANT: Use care when typing a password. Characters do not appear on the screen. 3. Press Enter. After setting the password, the computer sets the User Password parameter to Set. NOTE: NOTE: Password on Boot must be set to Enabled to activate password feature. 4. Press F10 to save changes and exit BIOS Setup Utility. System Utilities 2-9