eMachines E644G eMachines E644 and E644G Series Serivce Guide - Page 77
Using the LAN MAC EEPROM Utility, LAN MAC EEPROM, Table 2-5., Parameter, Description
View all eMachines E644G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using the LAN MAC EEPROM Utility 0 Perform the following steps to write MAC (Media Access Control) information to EEPROM: Use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode. 1. Use a text editor (Ex: Notepad) to open the MAC.CFG file. See the MAC.CFG contents in Figure 2-25 Figure 2-25. LAN MAC EEPROM Table 2-5. LAN MAC EEPROM Parameter Description WriteData = '001122334455' MAC value StartAddr=7A MAC address WriteLeng=6 MAC value length KeepByte=0 Value not important 2. Enter into DOS. 3. Run the MAC.BAT file to write MAC values to EEPROM. Figure 2-26. LAN MAC EEPROM 4. Reboot the system when the process has completed. System Utilities 2-25
System Utilities
2-25
Using the LAN MAC EEPROM Utility
0
Perform the following steps to write MAC (Media Access Control) information to EEPROM:
Use the
MAC.BAT
utility to write the
MAC.CFG
file to the EEPROM under DOS mode.
1.
Use a text editor (Ex: Notepad) to open the
MAC.CFG
file. See the
MAC.CFG
contents in
Figure 2-25
Figure 2-25.
LAN MAC EEPROM
Table 2-5.
LAN MAC EEPROM
2.
Enter into DOS.
3.
Run the
MAC.BAT
file to write MAC values to EEPROM.
Figure 2-26.
LAN MAC EEPROM
4.
Reboot the system when the process has completed.
Parameter
Description
WriteData = ‘001122334455'
MAC value
StartAddr=7A
MAC address
WriteLeng=6
MAC value length
KeepByte=0
Value not important