eMachines E644G eMachines E644 and E644G Series Serivce Guide - Page 74
Cleaning BIOS Passwords
View all eMachines E644G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Cleaning BIOS Passwords 0 ! CAUTION: If Power-on Password authentication is enabled, the BIOS password can only be cleared by initiating the Crisis Disk Recovery procedure. See Crisis Disk Recovery. To clean the User or Supervisor passwords, perform the following steps: 1. At the DOS prompt, enter clnpwd.exe. 2. Press 1 or 2 to clean the desired password shown on the screen. Figure 2-23. Clean BIOS Password 3. The on screen message shows function success or failure. 2-22 System Utilities
2-22
System Utilities
Cleaning BIOS Passwords
0
CAUTION
:
!
If Power-on Password authentication is enabled, the BIOS password can only be
cleared by initiating the Crisis Disk Recovery procedure. See
Crisis Disk
Recovery
.
To clean the User or Supervisor passwords, perform the following steps:
1.
At the DOS prompt, enter
clnpwd.exe.
2.
Press
1
or
2
to clean the desired password shown on the screen.
Figure 2-23.
Clean BIOS Password
3.
The on screen message shows function success or failure.