2006 BMW M6 Owner's Manual - Page 48

Adjustments MDrive With MDrive you can configure several individual settings for your vehicle on the Control Display and activate them simultaneously with the button on the steering wheel. > "EDC" Programs of the Electronic Damping Control, refer to page 73 > "DSC" Dynamic Stability Control and M Dynamic Mode, refer to page 71 > "POWER" Programs of the M Engine Dynamic Control, refer to page 55 > "Head-Up Display"* Views of the Head-Up Display, refer to page 77 You can reset all settings for MDrive to their default values: > "Reset to default" 5. Select the desired function. Configuring settings With the ignition switched on you can change the settings of MDrive on the Control Display. iDrive, for explanation of principle, refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Vehicle settings" and press the controller. 4. Move the controller forward if necessary so that the marking is located in the upper field. Turn the controller until "MDrive" is selected and press the controller. 6. Press the controller. 7. Turn the controller to select the desired setting. The functions contained in MDrive are displayed: > "SMG Drivelogic" Sequential Manual Transmission with Drivelogic: shifting modes and Drivelogic driving programs, refer to page 54 46 "Unchanged" retains the current setting made outside of MDrive. 8. Press the controller. The setting is stored for the remote control currently in use. Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG