2006 BMW M6 Owner's Manual - Page 83

5. Select "Pathway lighting" and press the controller. 6. Turn the controller to select the desired duration. 7. Press the controller to apply the setting. High beams/ roadside parking lamps Daytime running lamps* If desired, the light switch can remain in position 0, 1 or 3. In position 0 and 3 the exterior lighting is automatically switched off after the vehicle is switched off. In position 1 the parking lamps light up after the ignition is switched off. Switch on the parking lamps if required as described under Parking lamps. Controls 2 3 Headlamp flasher Roadside parking lamps Adaptive Head Light* The concept Adaptive Head Light is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road. Roadside parking lamps, left or right* You also enjoy the option of lighting up just one side of your vehicle when parking. When using this function, comply with national regulations. Switching on After parking the vehicle, press the lever in the desired direction 3, past the resistance point. The roadside parking lamps drain the battery. Do not leave them switched on for long periods of time, as otherwise it may no longer be possible to start the engine.< Activating Adaptive Head Light In switch position 3, the Adaptive Head Light is active and the automatic headlamp control is switched on, refer to page 80. To avoid blinding oncoming traffic, the Adaptive Head Light is not active when driving in reverse and points toward the passenger side when the vehicle is stopped. Switching off Briefly press the lever in the opposite direction 3 up to the resistance point. Malfunction The LED next to the symbol for automatic headlamp control flashes. The Adaptive Head Light is malfunctioning or has failed. Have the system checked as soon as possible. High-beam assistant* The concept This system automatically switches the high beams on and off again. A sensor on the front of the interior rearview mirror controls the process. The assistant ensures that the high beams are switched on whenever the traffic situation allows. This reduces the strain on you while at the same time providing you with the best possible visibility. Of course, you can inter- 81 Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips 1 High beams At a glance