2006 BMW M6 Owner's Manual - Page 92

Practical interior accessories Practical interior accessories Integrated universal remote control* The concept The integrated universal remote control replaces up to three different hand-held transmitters for various items of radio-controlled equipment such as door openers and house alarm systems. The integrated universal remote control registers and stores signals from the original hand-held transmitters. The signal of an original hand-held transmitter can be programmed on one of the three memory buttons 1. Then with the ignition switched on, this programmed memory button 1 can be used to operate the respective feature. The LED 2 flashes to confirm transmission of the signal. If you sell your vehicle one day, delete the saved programs beforehand for your own security, refer to page 91. To prevent possible damage or injury, before programming or using the integrated universal remote control, always inspect the immediate area to make certain that no people, animals or objects are within the travel range of the device. Also, comply with the safety precautions of the original hand-held transmitter.< HomeLink is a registered trademark of Johnson Controls, Inc.< Programming 1 2 Memory buttons LED Fixed-code hand-held transmitters 1. Switch on ignition, refer to page 50. 2. When using for the first time: press both outer memory buttons 1 for approx. 20 seconds until the LED 2 flashes. all stored programs are deleted. 3. Hold the original hand-held transmitter at a distance of approx. 2 in/5 cm to 8 in/20 cm from the memory buttons 1. The required distance between the hand-held transmitter and the memory buttons 1 depends on the particular system of the original hand-held transmitter used.< 4. Simultaneously press the transmit key on the original hand-held transmitter and the desired memory button 1 on the integrated universal remote control. The LED 2 flashes slowly at first. As soon as the LED 2 flashes rapidly, release both buttons. If the LED 2 does not flash rapidly after approx. 15 seconds, alter the distance. 5. To program other original hand-held transmitters, repeat steps 3 and 4. Checking compatibility If you see this symbol on the packaging or in the manual supplied with the original hand-held transmitter, it is safe to assume that it is compatible with the integrated universal remote control. If you have additional questions, please contact your BMW center or call: 1-800-355-3515. Information is also provided on the Internet at: www.bmwusa.com or www.homelink.com. 90 Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG