2007 BMW M5 Owner's Manual - Page 214

Replacing components Turn signals, front 21-watt bulb, PY21W 1. Turn the bulb holder to the left and remove. Tail lamps > Turn signals 1, tail lamps 6 and side marker lamps 7 are designed using LED technology. In the event of a malfunction, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. > Backup lamps: 16-watt bulb, W16W > Other lamps: 21-watt bulb, P21W 2. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. Side-mounted turn signals 5-watt bulb, W5W 1. Press back against the front edge of the lamp with the tip of your finger, then pivot it out. 1 2 3 4 5 6 7 Turn signal Tail lamp and brake lamp Backup lamp Brake lamp Reflector Tail lamp Side marker lamp Center brake lamp This lamp uses LED technology for operation. In the event of a malfunction, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. 2. Turn the bulb holder to the left and remove. 3. Remove the bulb for replacement. Side marker lamps, front and rear To replace, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Fender-mounted lamps The illustration shows the left-hand side of the cargo bay. All the bulbs are integrated into a central bulb fitting. 1. Lift up floor mat. 2. Undo the quick-release fasteners of the side panel and pull out the panel. 212 Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG