2007 BMW M5 Owner's Manual - Page 78

Everything under control 6. Select the menu item to be set and press the controller. 7. Select the desired unit of measure and press the controller. The settings are stored for the remote key currently in use. 1. Select "Tone / volume" and press the controller. 2. Select "Volume settings" and press the controller. Language on Control Display iDrive, for explanation of principle, refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Language / Units" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Languages" is selected and press the controller. 3. Change to the second field from the top if necessary. Select "Warning tones" and press the controller. 4. If necessary, change the field and turn the controller. The setting is applied. 6. Select "Text language" and press the controller. You can change the language of the text displays. 7. Select and activate the desired language by pressing the controller. The setting is stored for the remote control currently in use. Volume of warning tones* On vehicles equipped with a single drive, you can increase or decrease the volume of the warning tones, e.g. for the safety belt reminder, compared to the entertainment sound output. The warning tones have a specified minimum and maximum volume that cannot be dropped below or exceeded. 76 Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG