2007 BMW M5 Owner's Manual - Page 46

Adjusting Safety feature 1. Close the driver's door and switch the ignition on or off. 2. Press the desired memory button 1 or 2 and maintain pressure until the adjustment process has been completed. If the button was pressed inadvertently: press the button again; the LED goes out. 6. Select "Central locking" and press the controller. 7. Select "Last seat pos." and press the controller. 8. Select "After unlocking" or "After door opened". Requesting with remote control The last positions of the driver's seat, the exterior rearview mirrors, and steering wheel are stored for the remote control currently in use. You can choose when the position is requested: > Request when unlocking vehicle > Request when opening driver's door When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. Failure to do so could cause injury to persons or damage to objects behind the seat as a result of a rearward movement of the seat.< The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. iDrive, for explanation of principle, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. 9. Press the controller. To cancel the request: Select "Deactivated" and press the controller. Head restraints A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. Adjust the head restraint so that its center is approx. at ear level. Otherwise there is increased danger of injury in the event of an accident. Only remove the head restraints if no one will be sitting on the seat in question. Reinstall the head restraints before transporting passengers, as otherwise the head restraint cannot provide its protective function.< 44 Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG