2007 BMW M5 Owner's Manual - Page 80
2007 BMW M5 Manual
Page 80 highlights
Technology for comfort, convenience and safety PDC with visual warning* You can also have the system show distances to objects on the Control Display. Objects that are farther away are already shown there before a signal tone sounds. The setting is stored for the remote control currently in use. iDrive, for explanation of principle, refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. System limits Even with PDC, final responsibility for estimating the distance between the vehicle and any obstructions always remains with the driver. Even when sensors are provided, there is a blind spot in which objects can no longer be detected. The system is also subject to the physical limits that apply to all forms of ultrasonic measurement, such as those encountered with tow bars and trailer couplings, or thin and wedge-shaped objects etc. Low objects already displayed, e.g. curbs, can also disappear from the detection area of the sensors again before or after a continuous tone already sounds. Higher, protruding objects, e.g. ledges, cannot be detected. Loud sources of sound, inside and outside the vehicle, could drown out the PDC signal tone.< 3. Turn the controller until "Settings" is selected and press the controller. 4. Turn the controller until "Vehicle / Tires" is selected and press the controller. 5. Change to upper field if necessary. Turn the controller until "PDC" is selected and press the controller. Driving stability control systems Your BMW is equipped with an extended array of systems designed to enhance and maintain vehicle stability under extreme conditions. ABS Antilock Brake System ABS prevents locking of the wheels during braking. Safe steering response is maintained even during full braking. Active safety is thus increased. The ABS is operational every time you start the engine. Braking safely refer to page 113. CBC Cornering Brake Control When braking during curves or when braking during a lane change, driving stability and steering response are improved further. 6. Select "PDC display on" and press the controller. The PDC screen is activated. The display appears on the Control Display as soon as PDC is activated. Electronic brake-force distribution The system controls the brake pressure in the rear wheels to ensure stable braking behavior. 78 Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG