1997 Chevrolet Monte Carlo Owner's Manual - Page 129

PREV (1): Press this button or the SEEK left arrow to search for the previous selection on the tape. Your tape must have at least three seconds of silence between each selection for PREV or SEEK to work. The tape direction arrow blinks during PREV or SEEK operation. The sound will muteduring PREV or SEEK operation. Press this button or oneof the SEEK arrows again to returnto normal play. PROG (2): Press this button to play the other side of the tape. NEXT (3): Press this button or the SEEK right arrow to search for the next selection on the tape. If you hold the button or pressit more than once, the player will continue moving forward through the tape. Your tape must have at least three seconds of silence between each selection for NEXT or SEEKto work. The tape direction arrow blinks during NEXT or SEEK operation. The sound will mute duringNEXT or SEEK operation. Press this button or one of the SEEK arrows again to return to normal play. REV (4): Press this button to reverse the tape rapidly. Press it again to return to playing speed. The radio will play the last-selected station while the tape reverses. 00 (5): Press this button to reduce background noise. Note that the double-D symbol will appear on the display. Dolby@ Noise Reduction is manufactured under a license from Dolby Laboratories Licensing Corporation. Dolby and thedouble-D symbol are trademarks of Dolby Laboratories Licensing Corporation. FWD (6): Press this button to advance quickly to another part of the tape. Pressthe button again to return to playing speed. The radio will play the last-selected station while the tape advances. AM-FM: Press this button to play the radio when a tape is in the player. TAPE AUX:Press this button to change to the tape function when the radio ison. The tape symbol with an arrow will appear on the display when the tape active. is If your system is equipped with a remote playback device, pressing this button a second time will allow the remote device to play. 3-10