1997 Chevrolet Monte Carlo Owner's Manual - Page 200

10. Then replace the pressure cap. At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Be sure the arrows on the pressure cap line up like this. 8. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine fans. 9. By this time, the coolant level inside the radiator filler neck may be lower. Ifthe level is lower, add more of the proper DEX-COOL@coolant mixture through the filler neck until the level reachesthe base of the filler neck. 1I. Check the coolant in the recovery tank. The level in the coolant recovery tank should be at the HOT mark when theengine is hot or atthe COLD mark when the engine is cold.