1997 Chevrolet Monte Carlo Owner's Manual - Page 134
1997 Chevrolet Monte Carlo Manual
Page 134 highlights
EJECT Press this button to remove the disc. The radio will play. The disc will start at the firsttrack when you reinsert it. If you turn off the ignition or radiowith a disc in the player, it will stay in the player. When you turn on the ignition or system, thedisc will start playing where it was stopped. If you press EJECT but don't remove the disc, the playerwill pull the disc back in to protect it after about oneminute. If you leave a compact disc in the player while listening to the radio, it may become warm. Activating the Theft-Deterrent Feature The instructions which follow explain how to enter your secret code to activate the THEFTLOCK system. It is recommended that you read through all nine steps before starting the procedure. NOTE: If you allow more than 15 seconds to elapse between any steps, the radio automatically reverts to time and you must start the procedure over at Step 4. 1. Write down any three or four-digit number from 000 to 1999 and keep it in a safe place separate from thevehicle. Theft-Deterrent Feature THEFTLOCK" is designed to discourage theft of your radio. It works by using a secret code to disable all radio functions whenever battery power is removed. The THEFTLOCKfeature for the radio may be used or ignored. If ignored, the system plays normally and the radio is not protected by the feature. If THEFTLOCK is activated, your radio will not operate if stolen. When THEFTLOCK is activated, the radio will display LOC to indicate a locked condition anytimebattery power is removed. If your battery loses power for any reason, you must unlock the radiowith the secret code before itwill operate. 2. Turn the ignition to ACCESSORY or RUN. 3. Turn the radio off. 4. Press the 1 and 4 buttons together. Hold them down until --- shows on the display. Next you will use the secret code number which you have written down. 5. Press MN and 000 will appear on the display. 6. Press MN again to make the last two digits agree with your code. 7. Press HR to make the first one or two digits agree with your code.