2013 Chevrolet Camaro Owner's Manual - Page 186

7-30 Infotainment System Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . followed by a tone. After the last digit has been entered, say "Dial." Once connected, the person called will be heard through the audio speakers. Using the "Re-dial" Command 1. Press b / g. The system responds "Ready," followed by a tone. 2. After the tone, say "Re-dial." The system dials the last number called from the connected cell phone. Once connected, the person called will be heard through the audio speakers. 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press b / g to link all callers together. Press b / g to answer an incoming call when another call is active. The original call is placed on hold. Press b / g again to return to the original call. To ignore the incoming call, no action is required. Press $ / i to disconnect the current call and switch to the call on hold. Ending a Call Press . $ / i to end a call. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press b / then say "Mute Call." . . g , and g , and Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press 2. Say "Three-way call." Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle... To cancel mute, press b / then say "Un-mute Call." Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. b / g to answer the call. Press $ / i to ignore a call. Press b / g.