2013 Chevrolet Camaro Owner's Manual - Page 289
2013 Chevrolet Camaro Manual
Page 289 highlights
Vehicle Care 1. Locate the bulb assembly under the front fascia. 2. Disconnect the electrical connector from the bulb assembly and pull out the bulb assembly. 3. Push in the new bulb assembly to lock it into place. 4. Reconnect the electrical connector to the bulb assembly. The base model vehicle daytime running lamps are the low beam on the halogen headlamp. If one these lamps fails, see Headlamps, Front Turn Signal and Parking Lamps (Uplevel Vehicle) on page 10‑37 or Headlamps, Front Turn Signal and Parking Lamps (Base Vehicle) on page 10‑36 for replacement information. 10-39 Fog Lamps This vehicle may have fog lamps in the front fascia. To replace the fog lamp bulb in a ZL1, see your dealer. To replace one of these bulbs: 1. Locate the bulb assembly under the front fascia. 2. Disconnect the electrical connector from the bulb assembly and pull out the bulb assembly. 3. Push in the new bulb assembly to lock it into place. 4. Reconnect the electrical connector to the bulb assembly. 2. Remove the close out panel retainers to gain access to the bulb socket connectors. 3. Turn the bulb socket counterclockwise to remove it. 4. Pull the old bulb straight out of the bulb socket. 5. Push the new bulb straight into the bulb socket until it clicks. 6. Turn the bulb socket clockwise to reinstall. Taillamps, Turn Signal, and Stoplamps To replace a taillamp, turn signal, or stoplamp bulb: 1. Open the trunk. See Trunk on page 2‑8.