2013 Chevrolet Camaro Owner's Manual - Page 232

9-40 Driving and Operating PERF TRACTION 1 - WET / ACTIVE HANDLING ON . . Intended for all driver skill levels. Wet or damp conditions only - not intended for use in heavy rain or standing water. StabiliTrak is on and engine power is reduced based on conditions. These lights are on when the vehicle is in the PTM Mode. This optional handling mode can be selected by pressing the TCS/ StabiliTrak button on the console quickly two times. The appropriate message displays in the DIC. See Ride Control System Messages on page 5‑38. To experience the performance benefit of this system, after entering a curve and at the point where the driver would normally start to increase acceleration, the accelerator pedal can be fully pressed. The PTM system will modify the level of engine power for a smooth and consistent corner exit. To select a mode while in PTM, push the Selective Ride Control/ PTM − TOUR or + SPORT button on the center console. The PTM system contains five modes. These modes are selected by pressing the Selective Ride Control/PTM TOUR − or SPORT + button on the center console. The driver scrolls up or down through modes 1-5 by pressing the TOUR − or SPORT + button. The following is a DIC display description and the recommended usage of each mode. . PERF TRACTION 2 - DRY / ACTIVE HANDLING ON . For use by less experienced drivers or while learning a new track. Dry conditions only. StabiliTrak is on and engine power is slightly reduced based on conditions. . . PERF TRACTION 3 - SPORT 1 / ACTIVE HANDLING ON . For use by drivers who are familiar with the track.