2013 Chevrolet Camaro Owner's Manual - Page 31

Keys, Doors, and Windows Other conditions can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 2‑2. Starting the Vehicle To start the engine using the remote start feature: 1. Aim the RKE transmitter at the vehicle. 2. Press and release 3. Immediately after completing Step 2, press and hold for at least two seconds/ until the turn signal lamps flash. The turn signal lamps flashing confirms the request to remote start the vehicle has been received. When the engine starts, the parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked and the climate control system may come on. The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once. Insert the key and turn it to ON/RUN before driving. Extending Engine Run Time For a 10-minute extension, repeat Steps 1-3 while the engine is still running. The remote start can only be extended once. . 2-5 When the remote start is extended, the second 10 minutes will start immediately. For example, if the vehicle has been running for five minutes, and 10 minutes are added, the engine will run for a total of 15 minutes. A maximum of two remote starts are allowed between ignition cycles. The vehicle's ignition switch must be turned to ON/RUN and then back to LOCK/OFF using the key before the remote start procedure can be used again. Canceling a Remote Start To cancel a remote start, do one of the following: . Q. Aim the RKE transmitter at the vehicle and press and hold / until the parking lamps turn off. Turn on the hazard warning flashers. Turn the vehicle on and then off. .