2013 Chevrolet Camaro Owner's Manual - Page 236

9-44 Driving and Operating The indicator light on the instrument cluster goes out when the cruise is no longer engaged. Once the vehicle speed reaches about 40 km/h (25 mph) or more, press the thumbwheel up toward RES/+ briefly on the steering wheel. The vehicle returns to the previous set speed and stays there. Increasing Speed While Using Cruise Control If the cruise control system is already activated: . SET/− (Set/Coast): Move the thumbwheel down to set a speed or to make the vehicle decelerate. Setting Cruise Control If 5 is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used. 1. Press 5 to turn cruise control on. 2. Get to the speed desired. 3. Press the thumbwheel toward SET/− and release it. 4. Take your foot off the accelerator pedal. When the brakes are applied, the cruise control shuts off. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Reducing Speed While Using Cruise Control If the cruise control system is already activated: . Press the thumbwheel toward SET/− and hold until the desired lower speed is reached, then release it. To slow down in small amounts, press the thumbwheel toward SET/− briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower. . Press the thumbwheel up toward RES/+ and hold it until the vehicle accelerates to the desired speed, and then release it. To increase the speed in small amounts, press the thumbwheel up toward RES/+ briefly and then release it. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster. Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise control speed. Using Cruise Control on Hills How well the cruise control works on hills depends upon the vehicle's speed, load, and the steepness of the hills. When going up steep hills, .