2013 Chevrolet Camaro Owner's Manual - Page 214
2013 Chevrolet Camaro Manual
Page 214 highlights
9-22 Driving and Operating Release the button and check that the shift lever cannot be moved out of P (Park). WARNING (CONTINUED) It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. Do not leave the vehicle when the engine is running. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when you are on fairly level ground, always set the parking brake and move the shift lever to P (Park). See Shifting Into Park on page 9‑21. If you are towing a trailer, see Driving Characteristics and Towing Tips on page 9‑53. If you have to leave the vehicle with the engine running, the vehicle must be in P (Park) and the parking brake set. Shifting out of Park This vehicle is equipped with an electronic shift lock control system. The shift lock release is designed to: . Torque Lock Torque lock is when the weight of the vehicle puts too much force on the parking pawl in the transmission. This happens when parking on a hill and shifting the transmission into P (Park) is not done properly and then it is difficult to shift out of P (Park). To prevent torque lock, set the parking brake and then shift into P (Park). To find out how, see "Shifting Into Park" listed previously. If torque lock does occur, the vehicle may need to be pushed uphill by another vehicle to relieve the parking pawl pressure, so you can shift out of P (Park). Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released. Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN and the brake pedal is applied. . The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9-volt) battery. If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 10‑85. To shift out of P (Park): 1. Apply the brake pedal.