2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 112
2014 Chevrolet Silverado 1500 Extended Cab Manual
Page 112 highlights
3-52 Seats and Restraints Crew and Extended Cab Models 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the lower anchors for the desired seating position. 1.2. Put the child restraint on the seat. 1.3. Attach and tighten the lower attachments on the child restraint to the lower anchors. Example - Rear Driver Side Position 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor (loop), if your vehicle has one. Refer to the child restraint instructions and the following steps: 2. Secure the child restraint in the right front seating position with the vehicle safety belts. See Securing Child Restraints (Center Front Seat Position) on page 3-55 or Securing Child Restraints (Front Outboard Passenger Seat) on page 3-55 or Securing Child Restraints (Rear Seat) on page 3-64. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation.