2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 57

Keys, Doors, and Windows Programming the Power Windows If the battery on the vehicle has been recharged or disconnected, or is not working, the driver power window will need to be reprogrammed for the express-up feature to work. To reprogram the power windows: 1. Close all doors. 2. Place the ignition in ACC/ ACCESSORY or ON/RUN/ START. 3. From any open position, pull the power window switch up until the window is fully closed. 4. Hold the switch up for approximately two seconds after the window is fully closed. The window is now reprogrammed. 2-21 Express Window Anti-Pinch Feature If any object is in the path of the window when express-up is active, the window stops at the obstacle and auto-reverses to a preset factory position. Weather conditions such as severe icing also cause the window to auto-reverse. The window returns to normal operation once the obstacle or condition is removed. The anti-pinch feature can be overridden in a supervised mode. Hold the window switch in the partially or fully pulled up position. The window rises for as long as the switch is held. Once the switch is released, the express mode is reactivated. In this mode, the window can still close on an object in its path. Use care when using the override mode. Express Window Anti-Pinch Override { Warning If express override is activated, the window will not reverse automatically. You or others could be injured and the window could be damaged. Before you use express override, make sure that all people and obstructions are clear of the window path.