2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 318

9-64 Driving and Operating Ending Cruise Control There are three ways to end cruise control: . To disable and enable Cruise Grade Braking for the current ignition key cycle, press and hold the Tow/Haul button for five seconds. A DIC message displays. See Transmission Messages on page 5-41. . Driver Assistance Systems This vehicle may have features that work together to help avoid crashes or reduce crash damage while driving, backing, and parking. Read this entire section before using these systems. To disengage cruise control, step lightly on the brake pedal. Press . . Vehicles with a diesel engine have Cruise Grade Braking enabled when Tow/Haul Mode is on, the exhaust brake is on, or both are on. * on the steering wheel. To turn off the cruise control, press 5 on the steering wheel. Erasing Speed Memory The cruise control set speed is erased from memory by pressing or if the ignition is turned off. { Warning 5 Do not rely on the Driver Assistance Systems. These systems do not replace the need for paying attention and driving safely. You may not hear or feel alerts or warnings provided by these systems. Failure to use proper care when driving may result in injury, death, or vehicle damage. See Defensive Driving on page 9-3. (Continued) For other forms of Grade Braking, see Automatic Transmission on page 9-34.Tow/Haul Mode on page 9-39, and Hill Descent Control (HDC) on page 9-60.