2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 232

7-40 Infotainment System Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all phone pairing information. For information on how to delete this information, see "Deleting a Paired Phone." handset mode. The screen button changes to Hands-Free once the Bluetooth device confirms it is operating as handset. . 3. Say "Voice." The system responds "OK, accessing ." The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions. Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use. Sending a Number or Name Tag During a Call 1. Press g. The system responds "Ready," followed by a tone. 2. Say "Dial." 3. Say the number or name tag to send. Bluetooth (Infotainment Controls - Base Connected Radio) For information about how to navigate the menu system using the infotainment controls, see Overview on page 7-3. While the active call is handset, select the Hands-Free screen button to switch to the hands-free mode. The screen button changes to Handset once the Bluetooth device confirms it is operating as hands-free. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls can be made using OnStar Hands-Free Calling, if available. See OnStar Overview on page 14-1. Switching to Handset or Hands-Free Mode To switch between handset or hands-free mode, from the Home Page select the PHONE to display Call View. . While the active call is hands-free, press the Handset screen button to switch to the