2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 114

3-54 Seats and Restraints Reinstalling Rear Head Rests To reinstall the head rest: 1. Insert the head rest posts into the holes in the top of the seatback with the longer chrome plated post toward the driver side of the vehicle. 2. Push the head rest all the way down until it contacts the top of the seatback. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation. { Warning With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. Removing and Reinstalling Head Rests Removing Rear Head Rests For outboard rear seating positions, if the child restraint cannot be installed properly with the head rest in place, the head rest may be removed. See your dealer for assistance with removal and store the removed head rests in a secure place. When the child restraint is removed, reinstall the head rest before the seating position is used. Replacing LATCH System Parts After a Crash { Warning A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the (Continued)