2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 39
2014 Chevrolet Silverado 1500 Extended Cab Manual
Page 39 highlights
Keys, Doors, and Windows Programming without a Recognized Key Program a new key to the vehicle when a recognized key is not available. Canadian regulations require that owners see their dealer. If there are no currently recognized keys available, follow this procedure to program the first key. This procedure will take approximately 30 minutes to complete for the first key. The vehicle must be off and all of the keys you wish to program must be with you. 1. Insert the new vehicle key into the ignition. 2. Turn to ON/RUN. The security light will come on. 3. Wait 10 minutes until the security light turns off. 4. Turn the ignition to LOCK/OFF. 5. Repeat Steps 2-4 two more times. After the third time, turn to ON/RUN; the key is learned and all previously known keys will no longer work with the vehicle. Remaining keys can be learned by following the procedure in "Programming with a Recognized Key." The key has a bar-coded key tag that the dealer or qualified locksmith can use to make new keys. Store this information in a safe place, not in the vehicle. See your dealer if a replacement key or additional key is needed. If it becomes difficult to turn a key, inspect the key blade for debris. Periodically clean with a brush or pick. With an active OnStar subscription, an OnStar Advisor may remotely unlock the vehicle. See OnStar Overview on page 14-1. 2-3 Remote Keyless Entry (RKE) System See Radio Frequency Statement on page 13-15. If there is a decrease in the RKE operating range: . Check the distance. The transmitter may be too far from the vehicle. Check the location. Other vehicles or objects may be blocking the signal. Check the transmitter's battery. See "Battery Replacement" later in this section. If the transmitter is still not working correctly, see your dealer or a qualified technician for service. . . .