2014 Chevrolet Silverado 1500 Extended Cab Owner Manual - Page 67
2014 Chevrolet Silverado 1500 Extended Cab Manual
Page 67 highlights
Seats and Restraints Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver seat, outside mirrors, and adjustable pedals (if equipped) to the desired driving positions. 2. Press and hold SET and "1" at the same time until a beep sounds. 3. Repeat Steps 1 and 2 for a second driver using "2." To save positions to the B (Exit) button and easy exit features: 1. Adjust the driver seat, adjustable pedals (if equipped), and the outside mirrors on some vehicles to the desired positions for getting out of the vehicle. 2. Press and hold SET and B at the same time until a beep sounds. Manually Recalling Memory Positions If the vehicle is off, or in ON/RUN/ START but not in P (Park), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing "1," "2," or B before the stored positions are reached stops the recall. If the vehicle is in ON/RUN/START and in P (Park), press and release "1," "2," or B to manually recall the previously stored memory positions. Placing the ignition in OFF/LOCK before the stored positions are reached stops the recall. If something has blocked the driver seat and/or adjustable pedals while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service. 3-7 Automatically Recalling Memory Positions (Auto Memory Recall) The Auto (Automatic) Memory Recall feature automatically recalls the current driver 's previously stored "1" or "2" position when entering the vehicle. If the Auto Memory Recall feature is enabled in the vehicle personalization menu, memory "1" or "2" positions are recalled in the following ways: . Press K on the RKE transmitter and open the driver door. Press K on the RKE transmitter when the driver door is already open. . See Vehicle Personalization on page 5-44.