2012 Chrysler 300 Owner Manual SRT - Page 291

UNDERSTANDING YOUR INSTRUMENT PANEL 289 Vehicles equipped with the Anti-Lock Brake System 18. Electronic Stability Control (ESC) Activation/ (ABS), are also equipped with Electronic Brake Force Malfunction Indicator Light - If Equipped The "ESC Activation/Malfunction Indicator Distribution (EBD). In the event of an EBD failure, the Light" in the instrument cluster will come on Brake Warning Light will turn on along with the ABS when the ignition switch is turned to the Light. Immediate repair to the ABS system is required. ON/RUN position. It should go out with the Operation of the Brake Warning Light can be checked by engine running. If the "ESC Activation/Malfunction Inturning the ignition switch from the OFF position to the dicator Light" comes on continuously with the engine ON/RUN position. The light should illuminate for aprunning, a malfunction has been detected in the ESC proximately two seconds. The light should then turn off system. If this light remains on after several ignition unless the parking brake is applied or a brake fault is cycles, and the vehicle has been driven several miles detected. If the light does not illuminate, have the light (kilometers) at speeds greater than 30 mph (48 km/h), see inspected by an authorized dealer. your authorized dealer as soon as possible to have the The light also will turn on when the parking brake is problem diagnosed and corrected. applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 4