2012 Chrysler 300 Owner Manual SRT - Page 302
2012 Chrysler 300 Manual
Page 302 highlights
300 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The ЉOil Change DueЉ message will display in the EVIC for five seconds after a single chime has sounded at the start of each ignition that an oil change is due. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you cycle the ignition to the ON/RUN position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance), perform the following procedure: 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Without pressing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Fuel Economy Press and release the UP or DOWN button until ЉFuel EconomyЉ is highlighted. Press the SELECT button and the next screen will display the following: • Average Fuel Economy/Miles Per Gallon • Distance To Empty (DTE) 1. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/ • Miles Per Gallon (MPG) RUN position (Do not start the engine.)