2012 Chrysler 300 Owner Manual SRT - Page 437
2012 Chrysler 300 Manual
Page 437 highlights
WHAT TO DO IN EMERGENCIES 435 5. Uncoil the Power Plug (8) and insert the plug into the If the sealant (white fluid) does not flow within 0 - 10 seconds through the Sealant Hose (6): vehicle's 12 Volt power outlet. NOTE: Do not remove foreign objects (e.g., screws or 1. Press the Power Button (4) to turn Off the TIREFIT kit. Disconnect the Sealant Hose (6) from the valve stem. nails) from the tire. Make sure the valve stem is free of debris. Reconnect the (C) Injecting TIREFIT Sealant Into The Deflated Sealant Hose (6) to the valve stem. Check that the Mode Tire: Select Knob (5) is in the Sealant Mode position and not • Always start the engine before turning ON the TIRE- Air Mode. Press the Power Button (4) to turn On the TIREFIT kit. FIT kit. NOTE: Manual transmission vehicles must have the 2. Connect the Power Plug (8) to a different 12 Volt parking brake engaged and the shift lever in NEUTRAL. power outlet in your vehicle or another vehicle, if available. Make sure the engine is running before turning ON • After pressing the Power Button (4), the sealant (white the TIREFIT kit. fluid) will flow from the Sealant Bottle (1) through the 3. The Sealant Bottle (1) may be empty due to previous Sealant Hose (6) and into the tire. use. Call for assistance. NOTE: Sealant may leak out through the puncture in NOTE: If the Mode Select Knob (5) is on Air Mode and the tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). 6