2012 Chrysler 300 Owner Manual SRT - Page 440
2012 Chrysler 300 Manual
Page 440 highlights
438 WHAT TO DO IN EMERGENCIES If the tire pressure is 19 psi (1.3 bar) or higher: (E) After Driving: Pull over to a safe location. Refer to "Whenever You Stop 1. Press the Power Button (4) to turn on TIREFIT and to Use TIREFIT" before continuing. inflate the tire to the pressure indicated on the tire and 1. Turn the Mode Select Knob (5) to the Air Mode loading information label on the driver-side door openposition. ing. 2. Uncoil the power plug and insert the plug into the NOTE: If the tire becomes over-inflated, press the vehicle's 12 Volt power outlet. Deflation Button to reduce the tire pressure to the recommended inflation pressure before continuing. 3. Uncoil the Air Pump Hose (7) (black in color) and screw the fitting at the end of hose (7) onto the valve 2. Disconnect the TIREFIT kit from the valve stem, stem. reinstall the cap on the valve stem and unplug from 12 Volt outlet. 4. Check the pressure in the tire by reading the Pressure Gauge (3). 3. Place the TIREFIT kit in its proper storage area in the vehicle. If tire pressure is less than 19 psi (1.3 Bar) , the tire is too badly damaged. Do not attempt to drive the vehicle 4. Have the tire inspected and repaired or replaced at the further. Call for assistance. earliest opportunity at an authorized dealer or tire service center.