2012 Chrysler 300 Owner Manual SRT - Page 479

MAINTAINING YOUR VEHICLE 477 Use only manufacturer's recommended brake fluid. ReMaster Cylinder - Brake Fluid Level Check Check the fluid level in the master cylinder immediately if fer to "Fluids, Lubricants, and Genuine Parts" in "Maintaining Your Vehicle" for further information. the brake system warning light indicates system failure. Check the fluid level in the master cylinder when performing underhood services. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the "FULL" mark on the side of the master cylinder reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Add enough fluid to bring the level up to the requirements described on the brake fluid reservoir. With disc brakes, fluid level can be expected to fall as the brake pads wear. However, low fluid level may be caused by a leak and a checkup may be needed. WARNING! • Use only manufacturer's recommended brake fluid. Refer to "Fluids, Lubricants, and Genuine Parts" in "Maintaining Your Vehicle" for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir. (Continued) 7