2012 Chrysler 300 Owner Manual SRT - Page 54
2012 Chrysler 300 Manual
Page 54 highlights
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage try to move it up and down to make sure that it is locked in position. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. In the rear seat, move toward the center of the seat to Seat Belts In Passenger Seating Positions position the belt away from your neck. The seat belts in the passenger seating positions are equipped with Automatic Locking Retractors (ALR) which Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ are used to secure a child restraint system. For additional information, refer to "Installing Child Restraints Using shoulder belt. The Vehicle Seat Belt" under the "Child Restraints" sec1. Position the latch plate as close as possible to the tion. The chart below defines the type of feature for each seating position. anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. First Row Second Row Driver N/A ALR Center N/A ALR Passenger ALR ALR • N/A - Not Applicable • ALR - Automatic Locking Retractor