2012 Chrysler 300 Owner Manual SRT - Page 502

500 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Rear Backup Lamp and Turn Signal Lamps 1. Open the trunk. 4. Remove the three wing nuts from the back of the tail lamp assembly. 5. Pull the tail lamp assembly away from the vehicle enough to access the electrical connector. 6. Push the electrical connector locking tab to the side. 7. Disconnect the electrical connector. 8. Continue removing lamp from vehicle in order to access the bulb(s). 2. Remove the trunk trim by removing the grocery hook 9. Turn the appropriate bulb and socket assembly coun(using a T-20 torque driver or similar tool), remove the terclockwise to remove it from the tail lamp assembly. fastener, and pull back the weather strip. 10. Disconnect the bulb from the socket assembly and 3. Pull back the trunk liner to gain access to the tail lamp install the replacement bulb. wing nuts.