2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 118
2011 Dodge Ram 1500 Crew Cab Manual
Page 118 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Setting Memory Positions and Linking RKE Transmitter to Memory 5. Adjust the Automatic Temperature Control (ATC) while the ATC is in Auto mode. NOTE: Each time the S (SET) button and a numbered 6. Press and release the SET button located on the button (1 or 2) are pressed, you erase the memory settings driver's seat. for that button and store new settings. 7. Within five seconds, press and release MEMORY 1. Turn the vehicle key to the ON/RUN position. button 1 or 2 on the driver's seat. The next steps must be performed within 10 seconds if you desire to also use a 2. Adjust the driver's seat, recliner, and both sideview RKE transmitter to recall memory positions. mirrors to the desired positions. 8. Turn the ignition OFF and remove the key. NOTE: Not all motors may be moved at one time. Refer to "Seats/Eight-Way Power Seat" in this section for 9. Press and release the LOCK button on one of the RKE further information. transmitters. 3. Adjust the brake and accelerator pedals to the desired 10. Repeat the above steps to set the next memory positions. position using the other numbered memory button or to link another RKE transmitter to memory. 4. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 3