2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 481

480 STARTING AND OPERATING 15. Shift the transmission into gear, release the brake • The ignition switch must be in the ON/RUN position pedal (and clutch pedal on manual transmissions), and for a transfer case shift to take place and for the check that the vehicle operates normally. position indicator lights to be operable. If the ignition switch is not in the ON/RUN position, the shift will NOTE: not take place and no position indicator lights will be • Steps 1 through 5 are requirements that must be met on or flashing. prior to pressing the transfer case NEUTRAL button and must continue to be met until the shift has been • A flashing NEUTRAL position indicator light indicates that shift requirements have not been met. completed. If any of these requirements are not met prior to pressing the NEUTRAL button, or are no longer met during the shift, the NEUTRAL indicator light will flash continuously until all requirements are met or until the NEUTRAL button is released.