2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 435

434 STARTING AND OPERATING Tire Pressure Information label. The Supplemental Tire the rear face of the driver door. Using an accurate tire Pressure Information label is located on the rear face of pressure gauge, re-check the tire pressures for the light the driver door opening. Use an accurate tire gauge to load inflation pressure (cold) value. check the tire pressures when lowering all four tire WARNING! pressures. The vehicle may need to be driven above 15 mph (25 km/h) to receive this updated pressure It is the driver's responsibility to change to the max information. After all four tire pressures have been load inflation pressure (cold) low pressure warning lowered to the Light Load inflation pressures, press the threshold condition when not driving in the light tire light load inflation switch. If the tire light load load condition as defined as two occupants (150 lbs inflation switch's amber colored LED turns ON, the [68 kg] each) plus 200 pounds (91 kg) of cargo. The TPMS is using the light load inflation pressure (cold) low vehicle "Light Load Definition" is found in the pressure warning thresholds. Supplemental Tire Pressure Information label loIf the tire light load inflation switch amber colored LED cated on the rear face of the driver door. Failure to do flashes on and off for 10 seconds, after all four tire so may cause you to lose control resulting in a pressures have been lowered to the Light Load inflation collision, causing serious or fatal injury. pressures, the pressure in any one of the four tires may not be at the light load inflation pressure (cold) values as To switch back to the max load inflation pressure (cold) indicated for the Light Load condition as defined on the low pressure warning threshold, press the tire light load Supplemental Tire Pressure Information label located on inflation switch. It is not necessary to first fill the tires to