2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 22
2011 Dodge Ram 1500 Crew Cab Manual
Page 22 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 within five seconds to unlock all doors. The turn signal than ten seconds. Then, press and hold the UNLOCK lights will flash to acknowledge the unlock signal. The button while still holding the LOCK button. illuminated entry system will also turn on. 2. Release both buttons at the same time. Remote Key Unlock, Driver Door/All Doors First 3. Test the feature while outside of the vehicle by pressThis feature lets you program the system to unlock either ing the LOCK/UNLOCK buttons on the RKE transmitter the driver's door or all doors on the first press of the with the ignition switch in the OFF position and the key UNLOCK button on the RKE transmitter. To change the removed. current setting, proceed as follows: 4. Repeat these steps if you want to return this feature to • For vehicles equipped with the EVIC, refer to "Elecits previous setting. tronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)" in "Under- NOTE: Pressing the LOCK button on the RKE transmitstanding Your Instrument Panel" for further ter while you are inside the vehicle will activate the Vehicle Security Alarm System. Opening a door with the information. Vehicle Security Alarm System activated will cause the • For vehicles not equipped with the EVIC, perform the alarm to sound. Press the UNLOCK button to deactivate following procedure: the Vehicle Security Alarm System. 1. Press and hold the LOCK button on a programmed RKE transmitter for at least four seconds, but no longer 2