2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 53
2011 Dodge Ram 1500 Crew Cab Manual
Page 53 highlights
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE BeltAlert will be reactivated if the driver's seat belt is 3. Within 60 seconds of starting the vehicle, unbuckle unbuckled for more than 10 seconds and the vehicle and then re-buckle the driver's seat belt at least three times within 60 seconds, ending with the seat belt speed is greater than 5 mph (8 km/h). buckled. BeltAlert can be enabled or disabled by your authorized dealer or by performing the following procedure: NOTE: Watch for the Seat Belt Reminder Light to turn on while the seat belt retracts and turn off while reNOTE: The following steps must occur within the first buckling the seat belt. 60 seconds of the ignition switch being turned to the ON/RUN or START position. Chrysler Group LLC does 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successnot recommend deactivating the BeltAlert. fully completed the programming. 1. With all doors closed and the ignition switch in any position except ON/RUN or START, buckle the driver's BeltAlert can be reactivated by repeating this procedure. seat belt. NOTE: Although BeltAlert has been deactivated, the 2. Turn the ignition switch to the ON/RUN position and Seat Belt Reminder Light will continue to illuminate wait for the Seat Belt Reminder Light to turn off. while the driver's seat belt remains unbuckled or unretracted.